Care instructions

INTRODUCTION

The helmet must be worn at all times to maximize the protection available in any given impact.

INSTRUCTIONS FOR USE

For maximum safety, it is very important that the helmet be perfectly adjusted to your head size, i.e., neither too big nor too small. It must be comfortable without
constricting the head or forehead, or alternatively, it must not move too freely around the head. Always secure the chinstrap to keep the helmet firmly in place.

VISIBILITY

Tinted shields and goggles are intended for use during the daytime to reduce brightness and protect the eyes. Therefore, they must never be used for night riding or in low-light conditions.

SOUNDPROOFING

Wearing a helmet greatly reduces the ability to hear external noise. It is therefore crucial to remain vigilant to compensate for the reduction in hearing. Pay close attention to the environment to prevent the risk of accidents.

CLEANING AND MAINTENANCE

CLEANING THE HELMET

To clean the helmet’s shell, use a soft cloth (microfiber), a mild soap or non-abrasive detergent and warm water solution. Al low to air dry. To clean the shields, use a soft cloth (microfiber), slightly damp if needed. Never expose the helmet to extreme heat that could damage it.

STORING THE HELMET

Once it is cleaned, place the helmet back into the breathable cloth bag. Store it on a solid and level surface to prevent the helmet from being damaged if falling on the floor.

CLEANING THE LINING

The lining is hand washable with mild soap in warm water. Allow to air dry. Avoid exposing the lining to extreme heat.

WARNING: The helmet surface and its components could be badly damaged if using unintended materials for this purpose. Do not apply paint, stickers, or use gasoline and other types of chemical solvents on the CKX helmet.